Izdelki za ruska elan plus (17)

Fullgear HYP Plus 85W-140W, is a automotive gear oil that is specially developed for axles and differentials of heavy duty vehicles where API GL-5/MT-1 and SAE J2369 performances are required. Its special formula provides effective wear protection under high speed and high load.

Advance Plus Syn Roadranger SAE 50 is crafted from premium synthetic base oils and esters, designed specifically for use in Roadranger gearboxes. It’s a versatile lubricant suitable for a wide range of automotive and industrial applications, including transmissions, differentials, and final drives that demand TO-4 performance, particularly in cases where extreme pressure properties are not required. Advance Plus Syn Roadranger SAE 50 can also be employed in instances where the manufacturer recommends an API GL-1 service gear oil. Additionally, it serves well in mild gear oil applications within certain manual transmissions, spiral bevel axle assemblies, and worm gear drives found in commercial, agricultural, and truck equipment. Available in:200 Litres and 20 Litres Item code:VI4-2701

It is high quality oil that is formulated with qualified and adhesive additives and with highly refined base oils, and that enables movements of slide ways in machine tools operating under heavy loads to be proper and continuous.

It is high performance-locking type differential gear oil with specially developed formulations that control the friction coefficient as well as the high-tech solid and high-pressure (EP) properties far differential operating according to the limited slip principle. It was designed to meet the requirements of flawless operation and optimum performance in the most difficult conditions and during large temperature fluctuations.

Fleetmaster Semi Syn CJ-4 10W/40 is meticulously crafted using cutting-edge technology, blending mineral and synthetic base oils to cater to the demands of heavy-duty diesel engines enduring the rugged conditions. This exceptional lubricant boasts an ultra-high dispersant and anti-wear formulation that goes above and beyond the API CJ-4 requirements. It is purpose-built to align with the latest US07 emission standards, tailored specifically for engines featuring exhaust treatment systems, including Diesel Particulate Filters (DPF) and cooled Exhaust Gas Recirculation (EGR), while running on low sulfur fuels. Fleetmaster Semi Syn CJ-4 10W/40 surpasses numerous international specifications, ensuring peak performance and extended service life in four-stroke turbocharged and naturally aspirated diesel engines. It plays a crucial role in mitigating soot thickening in the latest low-emission US engines. API:CJ-4, CI-4 PLUS, CI-4, CH-4, CG-4, CF-4 API:SN, SM, SL ACEA:E9 Euro Emission requirements:I, II, III, IV, V, and VI Available in:Bulk, 200 Litres and 20 Litres Item code:VI2-2263

They are high performance gear oils developed far single or double clutch heavy duty gears and hipoid gears. The advanced additive system in its special formulation is resistant to over pressure (EP), corrosion, oxidation and anti-foaming, providing superior protection against wear in differen­ tial operating at high speed and/or under load. it was designed far use in differentials requiring the performance level of API GL-5 where heavy operating conditions are concerned.

It is high performance, full synthetic gear oil that is developed to be used in synchromesh/non- synchromesh gearboxes and di erentials of passenger vehicles, heavy vehicles and earth movers requiring lubrication in the performance level of API GL-5. It provides excellent performance during four seasons because of its high viscosity index. While it makes shifting easier under very low temperatures, it also provides high lubrication and resistance again stoxidation under very high temperatures. It provides protection again stabrasion even under sudden load shocks due to it excessive pressure feature (EP), and extends its life, and minimizes maintenance costs.

It is synthetic engine oil, that is prepared by adding advanced technological additive packs to synthetic base oils. It is suitable for any kind of gasoline and diesel passenger vehicles. Feature and Benefits • It provides fuel cost saving and long service life on account of its excellent viscosity control feature. • It provides extra protection against corrosion through special additive components it contains, and keeps its performance under any kind of operation conditions. • It makes operation under cold easier through its viscosity under low temperatures.

Fast 2 Semi Synthetic Two-Stroke Oil is meticulously crafted for use in high-performance two-stroke motorcycle engines, chainsaws, and power tools of the highest caliber. It is meticulously formulated from top-tier mineral base stock, enhanced with cutting-edge detergent additives, resulting in a contemporary lubricant that not only minimizes ash but also reduces smoke emission. Under rigorous controlled testing conditions, Fast 2 Semi Synthetic Two-Stroke Oil consistently delivers exceptional results, ensuring impeccable engine cleanliness and preventing ring sticking. Its stellar performance is a testament to its continuous refinement and development, forged through practical experience in the demanding world of high-performance motorcycle racing engines. Manufactured with self-mixing solvents, Fast 2 Semi Synthetic Two-Stroke Oil should be used in strict accordance with the fuel/oil ratio recommended by the engine manufacturer. Available in:4 Litres and 1 Litre Item code:VI8-2126A

PRODUCT DESCRIPTION Trans Oils are specialized Transmission and Drive Train Oils (TDTO) meticulously designed to meet the specific demands of the Caterpillar TO-4™ (2005 revision) specification. These oils offer a multitude of benefits, including a significant reduction in gear wear, enhanced friction control, extended lifespan for transmissions and brakes, reduced brake noise, and increased rimpull. Unlike conventional powershift fluids, which essentially function as engine oils meeting the less rigorous CAT TO-2™ and Allison C-2 specifications, Trans Oils are uncompromising in their performance. The individual additives in Trans Oils have been carefully chosen to precisely modulate and manage friction in both metallic and modern non-metallic clutch surfaces. These unique frictional properties address issues such as excessive brake noise, degradation of binders in paper-based materials, and the stiffening of elastomeric components. transmission fluid:sae 10w, 30, 50, 60 mineral:lubricants Package :20l, 60l, 200l, 208l, 1000l

It is high performance, full synthetic gear oil that is developed to be used in synchromesh/non-synchromesh gearboxes and di erentials of passenger vehicles, heavy vehicles and earth movers in performance level of API GL-5. It provides excellent performance during four seasons because of its high viscosity index. While it makes shifting easier under very low temperatures, it also provides high lubrication and resistance against oxidation under very high temperatures. It provides protection against abrasion even under excessive load shocks due to its excessive pressure feature (EP), and extends lives of gear systems, and minimizes maintenance costs.

Is a synthetic motor oil designed to meet the lubrication requirements of both gasoline and diesel engines designed for the formulation of new generation of additives and high performance base oils. 10w-40 is engineered to meet the needs of extended engine life and wear protection. It meets the needs of car manufacturers thanks to its semi-synthetic technology and superior formulation.

Is a high performance synthetic motor oil specially designed for maximum power generation of modern 4-stroke engines. It was developed to provide superior accumulation control and power protection under the most demanding operating conditions. Thanks to its excellent thermal and oxidation stability, it protects film strength at high temperature and reduces deposits especially in air-cooled engines. It provides full-performance stable power by reducing friction losses with optimized friction control. Effective lubrication at low ambient temperatures helps to start up easily and provides unique protection against wear. Excellent Viscosity stability softens the engine’s vibration and reduces noise. Its special designed detergent dispersing feature provides effective protection against rust and corrosion

It is a high performance, low viscosity full synthetic automatic transmission fluid that has been formulated for the latest generation of highly technical automatic transmissions. With an emphasis on fuel economy and smoother shifting, the ATF DEXRON VI has anti-wear, anti-corrosion, and anti-foaming properties. Designed to provide greater reactions in cold temperatures, better shear stability at higher temperatures, and oxidisation resistance.

Saw Oil is an aromatic oil with excellent lubricating properties for the lubrication of engines and chains of two-stroke sawmills used in woodcutting. It provides full protection of the parts by making good lubrication of the motors and chains of saws used in wood cutting. • It provides resistance against friction which reduces the power of the engine by controlling the wear and contamination. • Prevents the saw from heating, facilitates cutting.

SYNPLUS ACEA C2 0W/30 stands as a cutting-edge, full synthetic engine oil with a low to mid SAPS (Sulphated Ash, Phosphorus, and Sulphur) composition, designed to meet the rigorous ACEA C2 performance standards. This super high-performance lubricant represents the pinnacle of oil formulation and additive technology, offering the highest level of engine protection while promoting fuel efficiency. It is tailored for use in modern low-friction engines found in high-performance cars, light van diesel vehicles, and gasoline-powered vehicles. Engineered to deliver stability and compatibility with catalyst systems, SYNPLUS ACEA C2 0W/30 is designed for extended drain intervals in car and light van diesel engines equipped with catalytic converter exhaust systems. These engines are optimized to effectively utilize this low-friction, low-viscosity oil, maintaining a high temperature/high shear rate (HTHS) viscosity of at least 2.9 mPa-s. Available in:Bulk, 200 Litres, 20 Litres and 5 Litres Item Code:VI1-2129

Solcut QLB2 is a versatile solution suitable for a broad spectrum of applications. Whether you’re engaged in brass and aluminum machining within large transfer systems or tackling steel machining in smaller, single sump machines, Solcut QLB2 has you covered. This semi-synthetic biostable machining and grinding fluid forms transparent emulsions, which can become semi-translucent when used with hard water. Solcut QLB2 brings together the cleanliness and detergency typically associated with synthetic products while avoiding the sticky residues often encountered with such alternatives. It’s a reliable choice for various machining operations. Available in:200 Litres, 20 Litres Item code:VI6-2930